张燕,李瑞欣,张西正,郭勇.壳聚糖-脱细胞真皮三维材料作为骨组织工程支架材料的研究[J].医用生物力学,2010,25(1):11-15
壳聚糖-脱细胞真皮三维材料作为骨组织工程支架材料的研究
Study on the three-dimensional chitosan-decellularised-derma scaffolds for bone tissue engineering
  
DOI:10.3871/j.1004-7220.2010.01.15.
中文关键词:  壳聚糖;脱细胞真皮;空隙率  扫描电镜  骨组织工程;支架
英文关键词:Chitosan  Decellularised-derma  Porosity  Scanning electron microscopy  Bone tissue engineering  Scaffolds
基金项目:国家自然科学基金资助项目(10832012)
作者单位
张燕 军事医学科学院 卫生装备研究所 
李瑞欣 军事医学科学院 卫生装备研究所 
张西正 军事医学科学院 卫生装备研究所 
郭勇 军事医学科学院 卫生装备研究所 
摘要点击次数: 5090
全文下载次数: 3887
中文摘要:
      目的 观察MC3T3-El成骨前体细胞在壳聚糖-脱细胞真皮三维支架材料上的黏附情况,并评价其细胞相容性。方法 通过冷冻干燥制备壳聚糖-脱细胞真皮三维支架材料,并测试其孔隙率、密度和吸水率,通过扫描电镜分析支架的微观形貌。采用体外培养细胞的方法,将MC3T3-E1细胞直接接种到壳聚糖-脱细胞真皮三维支架材料上,培养2、3、4、5 h,各时间点各取3个样品,测定细胞在支架上的黏附率,确定最佳的细胞贴壁时间。将细胞接种到支架上,共培养1、3、5、7、9、11、13 d,采用MTS方法绘制细胞增殖曲线,组织化学染色观察细胞形态,并利用材料试验机测试不同时间材料细胞复合物的压缩弹性模量。结果 壳聚糖-脱细胞真皮材料具有连通的多孔结构,孔隙率为92.8%,密度为97.96g/L,吸水率为(2169±100)%。细胞相容性实验显示,成骨细胞易于在支架材料上黏附、增殖。结论 壳聚糖-脱细胞真皮材料具有连通的孔隙,孔径较均匀,MC3T3-El成骨前体细胞易在壳聚糖-脱细胞真皮三维支架材料上黏附、增殖,表明该支架材料具有良好的细胞相容性。
英文摘要:
      Objective: To observe the adhesion of MC3T3-El osteoblastic progenitor cells to the three-dimensional chitosan-decellularised-derma scaffolds, and evaluate the cytocompatibility of the scaffolds. Methods: The three-dimensional chitosan-decellularised-derma scaffolds were prepared by the freeze-drying method, the porosity, density and water absorption of which were measured. The microscopic morphology of the composite scaffolds was analyzed by the scanning electron microscopy (SEM). The MC3T3-E1 cells cultivated in vitro were seeded onto the composite scaffolds, and then co-cultured for 2, 3, 4 and 5 hours. At each time point, three specimens from each matrix were taken to determine the cell-adhesion rate, in order to ascertain the best time of the cell-adhesion. The cells were seeded onto the composite scaffolds, and then co-cultured for 1, 3, 5, 7, 9, 11 and 13 days. The MC3T3-E1 cells inside were evaluated with MTS test. The cell morphology was observed by the histological staining. The compression tests were performed using a Universal Testing Machine, at room temperature, as compared with no-cell-scaffolds.Results: The three-dimensional chitosan-decellularised-derma scaffolds had high interval porosity with the porosity (92.8%), the density (0.09796g/ml) and the water absorption (2169±100)%. The cytocompatibility test showed that the seeded MC3T3-E1 cells could adhere to the scaffolds and proliferate.Conclusion:The three-dimensional chitosan-decellularised-derma scaffolds had high interval porosity with the well-distributed diameter. The MC3T3-E1 cells were easy to adhere the scaffolds and proliferate which showed that the scaffolds had a good cytocompatibility.
查看全文  查看/发表评论  下载PDF阅读器
关闭
分享按钮 function PdfOpen(url){ var win="toolbar=no,location=no,directories=no,status=yes,menubar=yes,scrollbars=yes,resizable=yes"; window.open(url,"",win); } function openWin(url,w,h){ var win="toolbar=no,location=no,directories=no,status=no,menubar=no,scrollbars=yes,resizable=no,width=" + w + ",height=" + h; controlWindow=window.open(url,"",win); } &et=08EE5A5866ACE440E4655076DC828C173B7C00D237AEE08E954781D50EC00FA2AB8C268C398DE2A47C014A21491E4A8E8CA22C3AFBC1123BFF4ED8E26B0836878063F06A4DC62337FA4CAABF66E575EDEABB7FFE9918B6761BAC4E713AF30D32B48FC45B94DA346F&pcid=A9DB1C13C87CE289EA38239A9433C9DC&cid=0AAA7D21481497F8&jid=8462F39F60647D9390E6DB1DC3C345BD&yid=140ECF96957D60B2&aid=A6C56696A2BAC9CECA43D60B8A4F69B9&vid=&iid=CA4FD0336C81A37A&sid=708DD6B15D2464E8&eid=23CCDDCD68FFCC2F&fileno=201001003&flag=1&is_more=0"> var my_pcid="A9DB1C13C87CE289EA38239A9433C9DC"; var my_cid="0AAA7D21481497F8"; var my_jid="8462F39F60647D9390E6DB1DC3C345BD"; var my_yid="140ECF96957D60B2"; var my_aid="A6C56696A2BAC9CECA43D60B8A4F69B9";