搭桥、分流手术中分流管端侧交接缝合处的受力分析
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金


BIOMECHANICAL ANALYSIS OF SUTURE LINE STRESS IN THE END-TO-SIDE ANASTOMOSIS
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    本文对搭桥分流术中分流管端侧交接缝合处受力进行了分析,发现分流管向的张力随分流管面积与动脉管面积的比值增大而增大,并且在流量比为0.3时该张力有最小值。夹角的影响不大,但不可忽略。考虑到缝合材料等其它因素,还需建立对缝合线密度等因素的要求。

    Abstract:

    The tensile force acting on the suture line connecting a synthetic graft to a host artery in end-to-side anastomosis is shown to increase as the ratio of the graft-artery area,and has minimum value at 0.3 of the ratio of the flow rates.The angle of the end-to-side anastomosis is shown to have little effect on the suture line stress,but can not be negligated.Considering suture material and other factors,sufficient sutures per cm should be established.

    参考文献
    相似文献
    引证文献
引用本文

许世雄,由峻岭,林伟,关文翠.搭桥、分流手术中分流管端侧交接缝合处的受力分析[J].医用生物力学,1995,10(4):205-208

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期:
关闭