基于角膜生物力学对小切口角膜基质透镜取出手术优化及联合角膜胶原交联手术的效果分析
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Parameter Optimization of Small Incision Lenticule Extraction and Analysis on Surgical Effect of Corneal Cross-Linking Based on Corneal Biomechanical Properties
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    目的 建立小切口角膜基质透镜取出(small incision lenticule extraction, SMILE)手术的有限元模拟体系,模拟 术后角膜生物力学性能变化,为 SMILE 手术的优化设计提供依据,并探讨角膜胶原交联( corneal collagen cross- linking, CXL)手术对 SMILE 术后角膜生物力学性能的影响。 方法 采用交联强度梯度分布的超弹性本构关系描 述角膜的生物力学性能,建立 SMILE 手术的压痕有限元模型,设置不同的切口位置、切口弧度、侧切口角度和角膜 帽厚度,分析 SMILE 术后角膜生物力学性能的变化;对 SMILE 术后角膜进行 CXL 手术的有限元模拟,分析不同辐 射能量对角膜生物力学性能的影响。 结果 随着切口位置角度变小、切口弧度增加、侧切口角度从 90°增大到 135° 或减小到 45°、角膜帽厚度减小,SMILE 术后角膜最大 von Mises 应力不断增大;随着辐射能量增加,CXL 术后最大 von Mises 应力不断增加。 结论 构建的有限元模型可有效表征 SMILE 术后角膜的生物力学响应,为 SMILE 手术 的优化设计提供模拟依据;CXL 手术有助于提高 SMILE 术后角膜的生物力学强度。

    Abstract:

    Objective To establish a finite element simulation system for the surgery of small incision lenticule extraction (SMILE) and provide foundation for the optimization of SMILE based on simulation results of corneal biomechanical properties, and to study the effect of corneal collagen cross-linking ( CXL) on biomechanical properties of the cornea after SMILE. Methods The mechanical behaviors of the cornea were characterized by hyperelastic constitutive relations with the consideration of gradient distributions of cross-linking strength. The indentation finite element model of SMILE was established. By setting up different surgical parameters such as incision position, incision length, side-cut angle and thickness of corneal cap, the corneal biomechanical behaviors after SMILE were simulated and analyzed. The finite element simulation under different irradiation doses was conducted to analyze the effect of CXL on the cornea after SMILE. Results The maximum von Mises stress increased as the angle of incision position decreased, the incision length increased, the side-cut angle changed from 90° to 135° or 45°, and the thickness of corneal cap decreased. Moreover, the maximum von Mises stress after CXL increased with the radiation dose increasing. Conclusions The finite element model of SMILE constructed in this study can effectively be used to characterize corneal biomechanical responses and provide simulation references for the optimization of SMILE. In addition, the reduced corneal biomechanical strength after SMILE can be effectively improved by CXL.

    参考文献
    相似文献
    引证文献
引用本文

肖策文,肖厦子,文 丹,夏晓波,尹叶薇.基于角膜生物力学对小切口角膜基质透镜取出手术优化及联合角膜胶原交联手术的效果分析[J].医用生物力学,2022,37(6):1032-1038

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2022-09-14
  • 最后修改日期:2022-08-05
  • 录用日期:
  • 在线发布日期: 2022-12-24
  • 出版日期:
关闭